###################### Simulation and Testing ###################### Correctness and Performance =========================== Rigorous testing is central to our engineering process. The :doc:`features of our core ` are challenging, requiring us to meet exacting standards of correctness and performance. Data guarantees and transactional integrity must be maintained not only during normal operations but over a broad range of failure scenarios. At the same time, we aim to achieve performance goals such as low latencies and near-linear scalability. To meet these challenges, we use a combined regime of robust simulation, live performance testing, and hardware-based failure testing. Simulation ========== Simulation is a powerful tool for testing system correctness. Our simulation technology, called Simulation, is enabled by and tightly integrated with :doc:`flow`, our programming language for actor-based concurrency. In addition to generating efficient production code, Flow works with Simulation for simulated execution. The major goal of Simulation is to make sure that we find and diagnose issues in simulation rather than the real world. Simulation runs tens of thousands of simulations every night, each one simulating large numbers of component failures. Based on the volume of tests that we run and the increased intensity of the failures in our scenarios, we estimate that we have run the equivalent of roughly one trillion CPU-hours of simulation on FoundationDB. Simulation is able to conduct a *deterministic* simulation of an entire FoundationDB cluster within a single-threaded process. Determinism is crucial in that it allows perfect repeatability of a simulated run, facilitating controlled experiments to home in on issues. The simulation steps through time, synchronized across the system, representing a larger amount of real time in a smaller amount of simulated time. In practice, our simulations usually have about a 10-1 factor of real-to-simulated time, which is advantageous for the efficiency of testing. We run a broad range of simulations testing various aspects of the system. For example, we run a cycle test that uses key-values pairs arranged in a ring that executes transactions to change the values in a manner designed to maintain the ring's integrity, allowing a clear test of transactional isolation. Simulation simulates all physical components of a FoundationDB system, beginning with the number and type of machines in the cluster. For example, Simulation models drive performance on each machine, including drive space and the possibility of the drive filling up. Simulation also models the network, allowing a small amount of code to specify delivery of packets. We use Simulation to simulate failures modes at the network, machine, and datacenter levels, including connection failures, degradation of machine performance, machine shutdowns or reboots, machines coming back from the dead, etc. We stress-test all of these failure modes, failing machines at very short intervals, inducing unusually severe loads, and delaying communications channels. For a while, there was an informal competition within the engineering team to design failures that found the toughest bugs and issues the most easily. After a period of one-upsmanship, the reigning champion is called "swizzle-clogging". To swizzle-clog, you first pick a random subset of nodes in the cluster. Then, you "clog" (stop) each of their network connections one by one over a few seconds. Finally, you unclog them in a random order, again one by one, until they are all up. This pattern seems to be particularly good at finding deep issues that only happen in the rarest real-world cases. Simulation's success has surpassed our expectation and has been vital to our engineering team. It seems unlikely that we would have been able to build FoundationDB without this technology. Performance testing with Circus =============================== In addition to simulation, we continually run systematic performance tests on FoundationDB. Every night, we run an automated suite of performance tests using our "Circus" environment. For each Circus test, we specify the characteristics of the database to be used, e.g., 2 billion key-value pairs with 16 byte keys and randomly generated 8-100 byte values. The test selects the workloads to run and the cluster to run them on. Workloads specify the characteristics and proportions of reads and writes to be performed. (See our :doc:`performance` page for representative examples.) A test can run workloads either in parallel or sequentially. Workloads are specified using the same code as for simulation, which benefits the productivity of our testing. This process give us a daily comparison of the performance of the current code base to previous days. Performance is measured across many dimensions derived from the output of many tests. Our data exploration technology allows this output to be graphically explored, with the ability to isolate and examine key performance indicators.