Administration

This document covers the administration of an existing FoundationDB cluster. We recommend you read this document before setting up a cluster for performance testing or production use.

Note

In FoundationDB, a “cluster” refers to one or more FoundationDB processes spread across one or more physical machines that together host a FoundationDB database.

To administer an externally accessible cluster, you need to understand basic system tasks. You should begin with how to start and stop the database. Next, you should review management of a cluster, including adding and removing machines, and monitoring cluster status and the basic server processes. You should be familiar with managing trace files and other administrative concerns. Finally, you should know how to uninstall or upgrade the database.

FoundationDB also provides a number of different configuration options which you should know about when setting up a FoundationDB database.

Starting and stopping

After installation, FoundationDB is set to start automatically. You can manually start and stop the database with the commands shown below.

Linux

On Linux, FoundationDB is started and stopped using the service command as follows:

user@host$ sudo service foundationdb start
user@host$ sudo service foundationdb stop

On Ubuntu, it can be prevented from starting at boot as follows (without stopping the service):

user@host$ sudo update-rc.d foundationdb disable

On RHEL/CentOS, it can be prevented from starting at boot as follows (without stopping the service):

user@host$ sudo chkconfig foundationdb off

macOS

On macOS, FoundationDB is started and stopped using launchctl as follows:

host:~ user$ sudo launchctl load /Library/LaunchDaemons/com.foundationdb.fdbmonitor.plist
host:~ user$ sudo launchctl unload /Library/LaunchDaemons/com.foundationdb.fdbmonitor.plist

It can be stopped and prevented from starting at boot as follows:

host:~ user$ sudo launchctl unload -w /Library/LaunchDaemons/com.foundationdb.fdbmonitor.plist

Start, stop and restart behavior

These commands above start and stop the fdbmonitor process, which in turn starts fdbserver and backup-agent processes. See fdbmonitor and fdbserver for details.

After any child process has terminated by any reason, fdbmonitor tries to restart it. See restarting parameters.

When fdbmonitor itself is killed unexpectedly (for example, by the out-of-memory killer), all the child processes are also terminated. Then the operating system is responsible for restarting it. See Configuring autorestart of fdbmonitor.

Cluster files

FoundationDB servers and clients use a cluster file (usually named fdb.cluster) to connect to a cluster. The contents of the cluster file are the same for all processes that connect to the cluster. An fdb.cluster file is created automatically when you install a FoundationDB server and updated automatically when you change coordination servers. To connect to a cluster from a client machine, you will need access to a copy of the cluster file used by the servers in the cluster. Typically, you will copy the fdb.cluster file from the default location on a FoundationDB server to the default location on each client.

Warning

This file should not normally be modified manually. To change coordination servers, see Choosing coordination servers.

Default cluster file

When you initially install FoundationDB, a default fdb.cluster file will be placed at a system-dependent location:

  • Linux: /etc/foundationdb/fdb.cluster

  • macOS: /usr/local/etc/foundationdb/fdb.cluster

Specifying the cluster file

All FoundationDB components can be configured to use a specified cluster file:

  • The fdbcli tool allows a cluster file to be passed on the command line using the -C option.

  • The client APIs allow a cluster file to be passed when connecting to a cluster, usually via open().

  • A FoundationDB server or backup-agent allow a cluster file to be specified in foundationdb.conf.

In addition, FoundationDB allows you to use the environment variable FDB_CLUSTER_FILE to specify a cluster file. This approach is helpful if you operate or access more than one cluster.

All FoundationDB components will determine a cluster file in the following order:

  1. An explicitly provided file, whether a command line argument using -C or an argument to an API function, if one is given;

  2. The value of the FDB_CLUSTER_FILE environment variable, if it has been set;

  3. An fdb.cluster file in the current working directory, if one is present;

  4. The default file at its system-dependent location.

This automatic determination of a cluster file makes it easy to write code using FoundationDB without knowing exactly where it will be installed or what database it will need to connect to.

Warning

A cluster file must have the required permissions in order to be used.

Warning

If FDB_CLUSTER_FILE is read and has been set to an invalid value (such as an empty value, a file that does not exist, or a file that is not a valid cluster file), an error will result. FoundationDB will not fall back to another file.

Required Permissions

FoundationDB servers and clients require read and write access to the cluster file and its parent directory. This is because certain administrative changes to the cluster configuration (see Choosing coordination servers) can cause this file to be automatically modified by all servers and clients using the cluster. If a FoundationDB process cannot update the cluster file, it may eventually become unable to connect to the cluster.

Cluster file format

The cluster file contains a connection string consisting of a cluster identifier and a comma-separated list of IP addresses (not hostnames) specifying the coordination servers. The format for the file is:

description:ID@IP:PORT,IP:PORT,...
  • The description is a logical description of the database using alphanumeric characters (a-z, A-Z, 0-9) and underscores.

  • The ID is an arbitrary value containing alphanumeric characters (a-z, A-Z, 0-9). We recommend using a random eight-character identifier (such as the output of mktemp -u XXXXXXXX). Note that the ID will change when coordinators change.

  • The list of IP:PORT pairs specify the set of coordination servers. A majority of these servers must be available for the database to be operational so they should be chosen carefully. The number of coordination servers should therefore be odd and must be more than one to support fault-tolerance. We recommend using five coordination servers when using triple mode to maintain the ability to tolerate two simultaneous machine failures.

Together the description and the ID should uniquely identify a FoundationDB cluster.

A cluster file may contain comments, marked by the # character. All characters on a line after the first occurrence of a # will be ignored.

Generally, a cluster file should not be modified manually. Incorrect modifications after a cluster is created could result in data loss. To change the set of coordination servers used by a cluster, see Choosing coordination servers. To change the cluster description, see Changing the cluster description.

It is very important that each cluster use a unique random ID. If multiple processes use the same database description and ID but different sets of coordination servers, data corruption could result.

Accessing cluster file information from a client

Any client connected to FoundationDB can access information about its cluster file directly from the database:

  • To get the path to the cluster file, read the key \xFF\xFF/cluster_file_path.

  • To get the desired contents of the cluster file, read the key \xFF\xFF/connection_string. Make sure the client can write to the cluster file and keep it up to date.

IPv6 Support

FoundationDB (since v6.1) can accept network connections from clients connecting over IPv6. IPv6 address/port pair is represented as [IP]:PORT, e.g. “[::1]:4800”, “[abcd::dead:beef]:4500”.

  1. The cluster file can contain mix of IPv4 and IPv6 addresses. For example:

    description:ID@127.0.0.1:4500,[::1]:4500,...
    
  2. Starting fdbserver with IPv6:

    $ /path/to/fdbserver -C fdb.cluster -p \[::1\]:4500
    

Adding machines to a cluster

Warning

The macOS version of the FoundationDB server is intended for single-machine development use only; its use in multi-machine clusters is not supported. In the present release, the Linux version is the best-tested and most performant platform for multi-machine clusters.

You can add new machines to a cluster at any time:

  1. Install FoundationDB on the new machine.

  2. The default installation runs only one FoundationDB server process per machine (which will use only one CPU core). Most users of multi-machine configurations will want to maximize performance by running one FoundationDB server process per core. This is accomplished by modifying the configuration file (located at /etc/foundationdb/foundationdb.conf) to have [fdbserver.<ID>] sections for each core. Note that 4GiB ECC RAM are required per FoundationDB server process (see System requirements).

  3. Copy an existing cluster file from a server in your cluster to the new machine, overwriting the existing fdb.cluster file.

  4. Restart FoundationDB on the new machine so that it uses the new cluster file:

    user@host2$ sudo service foundationdb restart
    
  5. If you have previously excluded a machine from the cluster, you will need to take it off the exclusion list using the include <ip> or include <locality> command of fdbcli before it can be a full participant in the cluster.

Note

Addresses have the form IP:PORT. This form is used even if TLS is enabled.

Removing machines from a cluster

To temporarily or permanently remove one or more machines from a FoundationDB cluster without compromising fault tolerance or availability, perform the following steps:

  1. Make sure that your current redundancy mode will still make sense after removing the machines you want to remove. For example, if you are currently using triple redundancy and are reducing the number of servers to fewer than five, you should probably switch to a lower redundancy mode first. See Choosing a redundancy mode.

  2. If any of the machines that you would like to remove is a coordinator, you should change coordination servers to a set of servers that you will not be removing. Remember that even after changing coordinators, the old coordinators need to remain available until all servers and clients of the cluster have automatically updated their cluster files.

  3. Use the exclude command in fdbcli on the machines you plan to remove:

user@host1$ fdbcli
Using cluster file `/etc/foundationdb/fdb.cluster'.

The database is available.

Welcome to the fdbcli. For help, type `help'.
fdb> exclude 1.2.3.4 1.2.3.5 1.2.3.6 locality_dcid:primary-satellite locality_zoneid:primary-satellite-log-2 locality_machineid:primary-stateless-1 locality_processid:223be2da244ca0182375364e4d122c30 or any locality
Waiting for state to be removed from all excluded servers.  This may take a while.
It is now safe to remove these machines or processes from the cluster.

exclude can be used to exclude either machines (by specifying an IP address) or individual processes (by specifying an IP:PORT pair or by specifying a locality match).

Note

Addresses have the form IP:PORT. This form is used even if TLS is enabled.

Excluding a server doesn’t shut it down immediately; data on the machine is first moved away. When the exclude command completes successfully (by returning control to the command prompt), the machines that you specified are no longer required to maintain the configured redundancy mode. A large amount of data might need to be transferred first, so be patient. When the process is complete, the excluded machine or process can be shut down without fault tolerance or availability consequences.

If you interrupt the exclude command with Ctrl-C after seeing the “waiting for state to be removed” message, the exclusion work will continue in the background. Repeating the command will continue waiting for the exclusion to complete. To reverse the effect of the exclude command, use the include command.

Excluding a server with the failed flag will shut it down immediately; it will assume that it has already become unrecoverable or unreachable, and will not attempt to move the data on the machine away. This may break the guarantee required to maintain the configured redundancy mode, which will be checked internally, and the command may be denied if the guarantee is violated. This safety check can be ignored by using the command exclude FORCE failed.

In case you want to include a new machine with the same address as a server previously marked as failed, you can allow it to join by using the include failed command.

  1. On each removed machine, stop the FoundationDB server and prevent it from starting at the next boot. Follow the instructions for your platform. For example, on Ubuntu:

    user@host3$ sudo service foundationdb stop
    user@host3$ sudo update-rc.d foundationdb disable
    
  2. Test the database to double check that everything went smoothly, paying particular attention to the replication health.

  3. You can optionally uninstall the FoundationDB server package entirely and/or delete database files on removed servers.

  4. If you ever want to add a removed machine back to the cluster, you will have to take it off the excluded servers list to which it was added in step 3. This can be done using the include command of fdbcli. If attempting to re-include a failed server, this can be done using the include failed command of fdbcli. Typing exclude with no parameters will tell you the current list of excluded and failed machines.

As of api version 700, excluding servers can be done with the special key space management module as well.

Moving a cluster

The procedures for adding and removing machines can be combined into a recipe for moving an existing cluster to new machines.

Converting an existing cluster to use TLS

A FoundationDB cluster has the option of supporting Transport Layer Security (TLS). To enable TLS on an existing, non-TLS cluster, see Converting a running cluster.

Monitoring cluster status

Use the status command of fdbcli to determine if the cluster is up and running:

user@host$ fdbcli
Using cluster file `/etc/foundationdb/fdb.cluster'.

The database is available.

Welcome to the fdbcli. For help, type `help'.
fdb> status

Configuration:
  Redundancy mode        - triple
  Storage engine         - ssd-2
  Coordinators           - 5
  Desired GRV Proxies    - 1
  Desired Commit Proxies - 4
  Desired Logs           - 8

Cluster:
  FoundationDB processes - 272
  Machines               - 16
  Memory availability    - 14.5 GB per process on machine with least available
  Retransmissions rate   - 20 Hz
  Fault Tolerance        - 2 machines
  Server time            - 03/19/18 08:51:52

Data:
  Replication health     - Healthy
  Moving data            - 0.000 GB
  Sum of key-value sizes - 3.298 TB
  Disk space used        - 15.243 TB

Operating space:
  Storage server         - 1656.2 GB free on most full server
  Log server             - 1794.7 GB free on most full server

Workload:
  Read rate              - 55990 Hz
  Write rate             - 14946 Hz
  Transactions started   - 6321 Hz
  Transactions committed - 1132 Hz
  Conflict rate          - 0 Hz

Backup and DR:
  Running backups        - 1
  Running DRs            - 1 as primary

Client time: 03/19/18 08:51:51

The summary fields are interpreted as follows:

Redundancy mode

The currently configured redundancy mode (see the section Choosing a redundancy mode)

Storage engine

The currently configured storage engine (see the section Configuring the storage subsystem)

Coordinators

The number of FoundationDB coordination servers

Desired GRV Proxies

Number of GRV proxies desired. (default 1)

Desired Commit Proxies

Number of commit proxies desired. If replication mode is 3 then default number of commit proxies is 3

Desired Logs

Number of logs desired. If replication mode is 3 then default number of logs is 3

FoundationDB processes

Number of FoundationDB processes participating in the cluster

Machines

Number of physical machines running at least one FoundationDB process that is participating in the cluster

Memory availability

RAM per process on machine with least available (see details below)

Retransmissions rate

Ratio of retransmitted packets to the total number of packets.

Fault tolerance

Maximum number of machines that can fail without losing data or availability (number for losing data will be reported separately if lower)

Server time

Timestamp from the server

Replication health

A qualitative estimate of the health of data replication

Moving data

Amount of data currently in movement between machines

Sum of key-value sizes

Estimated total size of keys and values stored (not including any overhead or replication)

Disk space used

Overall disk space used by the cluster

Storage server

Free space for storage on the server with least available. For ssd storage engine, includes only disk; for memory storage engine, includes both RAM and disk.

Log server

Free space for log server on the server with least available.

Read rate

The current number of reads per second

Write rate

The current number of writes per second

Transaction started

The current number of transactions started per second

Transaction committed

The current number of transactions committed per second

Conflict rate

The current number of conflicts per second

Running backups

Number of backups currently running. Different backups could be backing up to different prefixes and/or to different targets.

Running DRs

Number of DRs currently running. Different DRs could be streaming different prefixes and/or to different DR clusters.

The “Memory availability” is a conservative estimate of the minimal RAM available to any fdbserver process across all machines in the cluster. This value is calculated in two steps. Memory available per process is first calculated for each machine by taking:

availability = ((total - committed) + sum(processSize)) / processes

where:

total

total RAM on the machine

committed

committed RAM on the machine

processSize

total physical memory used by a given fdbserver process

processes

number of fdbserver processes on the machine

The reported value is then the minimum of memory available per process over all machines in the cluster. If this value is below 4.0 GB, a warning message is added to the status report.

Process details

The status command can provide detailed statistics about the cluster and the database by giving it the details argument:

user@host$ fdbcli
Using cluster file `/etc/foundationdb/fdb.cluster'.

The database is available.

Welcome to the fdbcli. For help, type `help'.
fdb> status details


Configuration:
  Redundancy mode        - triple
  Storage engine         - ssd-2
  Coordinators           - 5

Cluster:
  FoundationDB processes - 85
  Machines               - 5
  Memory availability    - 7.4 GB per process on machine with least available
  Retransmissions rate   - 5 Hz
  Fault Tolerance        - 2 machines
  Server time            - 03/19/18 08:59:37

Data:
  Replication health     - Healthy
  Moving data            - 0.000 GB
  Sum of key-value sizes - 87.068 GB
  Disk space used        - 327.819 GB

Operating space:
  Storage server         - 888.2 GB free on most full server
  Log server             - 897.3 GB free on most full server

Workload:
  Read rate              - 117 Hz
  Write rate             - 0 Hz
  Transactions started   - 43 Hz
  Transactions committed - 1 Hz
  Conflict rate          - 0 Hz

Process performance details:
  10.0.4.1:4500     (  2% cpu;  2% machine; 0.010 Gbps;  0% disk IO; 3.2 GB / 7.4 GB RAM  )
  10.0.4.1:4501     (  1% cpu;  2% machine; 0.010 Gbps;  3% disk IO; 2.6 GB / 7.4 GB RAM  )
  10.0.4.1:4502     (  2% cpu;  2% machine; 0.010 Gbps;  0% disk IO; 2.6 GB / 7.4 GB RAM  )
  10.0.4.1:4503     (  0% cpu;  2% machine; 0.010 Gbps;  0% disk IO; 2.7 GB / 7.4 GB RAM  )
  10.0.4.1:4504     (  0% cpu;  2% machine; 0.010 Gbps;  0% disk IO; 2.6 GB / 7.4 GB RAM  )
  10.0.4.1:4505     (  2% cpu;  2% machine; 0.010 Gbps;  0% disk IO; 2.7 GB / 7.4 GB RAM  )
  10.0.4.1:4506     (  2% cpu;  2% machine; 0.010 Gbps;  0% disk IO; 2.7 GB / 7.4 GB RAM  )
  10.0.4.1:4507     (  2% cpu;  2% machine; 0.010 Gbps;  0% disk IO; 2.7 GB / 7.4 GB RAM  )
  10.0.4.1:4508     (  2% cpu;  2% machine; 0.010 Gbps;  1% disk IO; 2.6 GB / 7.4 GB RAM  )
  10.0.4.1:4509     (  2% cpu;  2% machine; 0.010 Gbps;  1% disk IO; 2.6 GB / 7.4 GB RAM  )
  10.0.4.1:4510     (  1% cpu;  2% machine; 0.010 Gbps;  1% disk IO; 2.7 GB / 7.4 GB RAM  )
  10.0.4.1:4511     (  0% cpu;  2% machine; 0.010 Gbps;  0% disk IO; 2.6 GB / 7.4 GB RAM  )
  10.0.4.1:4512     (  0% cpu;  2% machine; 0.010 Gbps;  0% disk IO; 2.6 GB / 7.4 GB RAM  )
  10.0.4.1:4513     (  0% cpu;  2% machine; 0.010 Gbps;  0% disk IO; 2.7 GB / 7.4 GB RAM  )
  10.0.4.1:4514     (  0% cpu;  2% machine; 0.010 Gbps;  0% disk IO; 0.2 GB / 7.4 GB RAM  )
  10.0.4.1:4515     ( 12% cpu;  2% machine; 0.010 Gbps;  0% disk IO; 0.2 GB / 7.4 GB RAM  )
  10.0.4.1:4516     (  0% cpu;  2% machine; 0.010 Gbps;  0% disk IO; 0.3 GB / 7.4 GB RAM  )
  10.0.4.2:4500     (  2% cpu;  3% machine; 0.124 Gbps;  0% disk IO; 3.2 GB / 7.4 GB RAM  )
  10.0.4.2:4501     ( 15% cpu;  3% machine; 0.124 Gbps; 19% disk IO; 2.6 GB / 7.4 GB RAM  )
  10.0.4.2:4502     (  2% cpu;  3% machine; 0.124 Gbps;  0% disk IO; 2.6 GB / 7.4 GB RAM  )
  10.0.4.2:4503     (  2% cpu;  3% machine; 0.124 Gbps;  0% disk IO; 2.6 GB / 7.4 GB RAM  )
  10.0.4.2:4504     (  2% cpu;  3% machine; 0.124 Gbps;  1% disk IO; 2.6 GB / 7.4 GB RAM  )
  10.0.4.2:4505     ( 18% cpu;  3% machine; 0.124 Gbps; 18% disk IO; 2.6 GB / 7.4 GB RAM  )
  10.0.4.2:4506     (  2% cpu;  3% machine; 0.124 Gbps;  0% disk IO; 2.6 GB / 7.4 GB RAM  )
  10.0.4.2:4507     (  2% cpu;  3% machine; 0.124 Gbps;  0% disk IO; 2.6 GB / 7.4 GB RAM  )
  10.0.4.2:4508     (  2% cpu;  3% machine; 0.124 Gbps; 19% disk IO; 2.6 GB / 7.4 GB RAM  )
  10.0.4.2:4509     (  0% cpu;  3% machine; 0.124 Gbps;  0% disk IO; 2.6 GB / 7.4 GB RAM  )
  10.0.4.2:4510     (  0% cpu;  3% machine; 0.124 Gbps;  0% disk IO; 2.6 GB / 7.4 GB RAM  )
  10.0.4.2:4511     (  2% cpu;  3% machine; 0.124 Gbps;  1% disk IO; 2.6 GB / 7.4 GB RAM  )
  10.0.4.2:4512     (  2% cpu;  3% machine; 0.124 Gbps; 19% disk IO; 2.7 GB / 7.4 GB RAM  )
  10.0.4.2:4513     (  0% cpu;  3% machine; 0.124 Gbps;  0% disk IO; 2.6 GB / 7.4 GB RAM  )
  10.0.4.2:4514     (  0% cpu;  3% machine; 0.124 Gbps;  0% disk IO; 0.2 GB / 7.4 GB RAM  )
  10.0.4.2:4515     ( 11% cpu;  3% machine; 0.124 Gbps;  0% disk IO; 0.2 GB / 7.4 GB RAM  )
  10.0.4.2:4516     (  0% cpu;  3% machine; 0.124 Gbps;  0% disk IO; 0.6 GB / 7.4 GB RAM  )
  10.0.4.3:4500     ( 14% cpu;  3% machine; 0.284 Gbps; 26% disk IO; 3.0 GB / 7.4 GB RAM  )
  10.0.4.3:4501     (  2% cpu;  3% machine; 0.284 Gbps;  0% disk IO; 2.8 GB / 7.4 GB RAM  )
  10.0.4.3:4502     (  2% cpu;  3% machine; 0.284 Gbps;  0% disk IO; 2.8 GB / 7.4 GB RAM  )
  10.0.4.3:4503     (  2% cpu;  3% machine; 0.284 Gbps;  0% disk IO; 2.7 GB / 7.4 GB RAM  )
  10.0.4.3:4504     (  7% cpu;  3% machine; 0.284 Gbps; 12% disk IO; 2.6 GB / 7.4 GB RAM  )
  10.0.4.3:4505     (  2% cpu;  3% machine; 0.284 Gbps;  0% disk IO; 2.7 GB / 7.4 GB RAM  )
  10.0.4.3:4506     (  2% cpu;  3% machine; 0.284 Gbps;  0% disk IO; 2.6 GB / 7.4 GB RAM  )
  10.0.4.3:4507     (  2% cpu;  3% machine; 0.284 Gbps; 26% disk IO; 2.6 GB / 7.4 GB RAM  )
  10.0.4.3:4508     (  2% cpu;  3% machine; 0.284 Gbps;  0% disk IO; 2.7 GB / 7.4 GB RAM  )
  10.0.4.3:4509     (  2% cpu;  3% machine; 0.284 Gbps;  0% disk IO; 2.6 GB / 7.4 GB RAM  )
  10.0.4.3:4510     (  2% cpu;  3% machine; 0.284 Gbps;  0% disk IO; 2.7 GB / 7.4 GB RAM  )
  10.0.4.3:4511     (  2% cpu;  3% machine; 0.284 Gbps; 12% disk IO; 2.6 GB / 7.4 GB RAM  )
  10.0.4.3:4512     (  2% cpu;  3% machine; 0.284 Gbps;  3% disk IO; 2.7 GB / 7.4 GB RAM  )
  10.0.4.3:4513     (  2% cpu;  3% machine; 0.284 Gbps;  0% disk IO; 2.6 GB / 7.4 GB RAM  )
  10.0.4.3:4514     (  0% cpu;  3% machine; 0.284 Gbps;  0% disk IO; 0.1 GB / 7.4 GB RAM  )
  10.0.4.3:4515     (  0% cpu;  3% machine; 0.284 Gbps;  0% disk IO; 0.1 GB / 7.4 GB RAM  )
  10.0.4.3:4516     (  0% cpu;  3% machine; 0.284 Gbps;  0% disk IO; 0.1 GB / 7.4 GB RAM  )
  10.0.4.4:4500     (  2% cpu;  4% machine; 0.065 Gbps;  0% disk IO; 3.2 GB / 7.4 GB RAM  )
  10.0.4.4:4501     (  2% cpu;  4% machine; 0.065 Gbps;  0% disk IO; 2.6 GB / 7.4 GB RAM  )
  10.0.4.4:4502     (  0% cpu;  4% machine; 0.065 Gbps;  0% disk IO; 2.6 GB / 7.4 GB RAM  )
  10.0.4.4:4503     (  2% cpu;  4% machine; 0.065 Gbps; 16% disk IO; 2.6 GB / 7.4 GB RAM  )
  10.0.4.4:4504     (  2% cpu;  4% machine; 0.065 Gbps;  0% disk IO; 2.7 GB / 7.4 GB RAM  )
  10.0.4.4:4505     (  0% cpu;  4% machine; 0.065 Gbps;  0% disk IO; 2.6 GB / 7.4 GB RAM  )
  10.0.4.4:4506     (  0% cpu;  4% machine; 0.065 Gbps;  0% disk IO; 2.6 GB / 7.4 GB RAM  )
  10.0.4.4:4507     (  2% cpu;  4% machine; 0.065 Gbps;  0% disk IO; 2.6 GB / 7.4 GB RAM  )
  10.0.4.4:4508     (  0% cpu;  4% machine; 0.065 Gbps;  0% disk IO; 2.6 GB / 7.4 GB RAM  )
  10.0.4.4:4509     (  2% cpu;  4% machine; 0.065 Gbps;  0% disk IO; 2.6 GB / 7.4 GB RAM  )
  10.0.4.4:4510     ( 24% cpu;  4% machine; 0.065 Gbps; 15% disk IO; 2.6 GB / 7.4 GB RAM  )
  10.0.4.4:4511     (  2% cpu;  4% machine; 0.065 Gbps;  0% disk IO; 2.8 GB / 7.4 GB RAM  )
  10.0.4.4:4512     (  2% cpu;  4% machine; 0.065 Gbps;  0% disk IO; 2.7 GB / 7.4 GB RAM  )
  10.0.4.4:4513     (  0% cpu;  4% machine; 0.065 Gbps;  0% disk IO; 2.6 GB / 7.4 GB RAM  )
  10.0.4.4:4514     (  0% cpu;  4% machine; 0.065 Gbps;  1% disk IO; 0.2 GB / 7.4 GB RAM  )
  10.0.4.4:4515     (  0% cpu;  4% machine; 0.065 Gbps;  1% disk IO; 0.2 GB / 7.4 GB RAM  )
  10.0.4.4:4516     (  0% cpu;  4% machine; 0.065 Gbps;  1% disk IO; 0.6 GB / 7.4 GB RAM  )
  10.0.4.5:4500     (  6% cpu;  2% machine; 0.076 Gbps;  7% disk IO; 3.2 GB / 7.4 GB RAM  )
  10.0.4.5:4501     (  2% cpu;  2% machine; 0.076 Gbps; 19% disk IO; 2.6 GB / 7.4 GB RAM  )
  10.0.4.5:4502     (  1% cpu;  2% machine; 0.076 Gbps;  0% disk IO; 2.6 GB / 7.4 GB RAM  )
  10.0.4.5:4503     (  0% cpu;  2% machine; 0.076 Gbps;  0% disk IO; 2.6 GB / 7.4 GB RAM  )
  10.0.4.5:4504     (  2% cpu;  2% machine; 0.076 Gbps;  0% disk IO; 2.7 GB / 7.4 GB RAM  )
  10.0.4.5:4505     (  2% cpu;  2% machine; 0.076 Gbps;  0% disk IO; 2.7 GB / 7.4 GB RAM  )
  10.0.4.5:4506     (  0% cpu;  2% machine; 0.076 Gbps;  0% disk IO; 2.6 GB / 7.4 GB RAM  )
  10.0.4.5:4507     (  2% cpu;  2% machine; 0.076 Gbps;  6% disk IO; 2.6 GB / 7.4 GB RAM  )
  10.0.4.5:4508     ( 31% cpu;  2% machine; 0.076 Gbps;  8% disk IO; 2.7 GB / 7.4 GB RAM  )
  10.0.4.5:4509     (  0% cpu;  2% machine; 0.076 Gbps;  0% disk IO; 2.6 GB / 7.4 GB RAM  )
  10.0.4.5:4510     (  2% cpu;  2% machine; 0.076 Gbps;  0% disk IO; 2.7 GB / 7.4 GB RAM  )
  10.0.4.5:4511     (  2% cpu;  2% machine; 0.076 Gbps;  0% disk IO; 2.6 GB / 7.4 GB RAM  )
  10.0.4.5:4512     (  2% cpu;  2% machine; 0.076 Gbps;  0% disk IO; 2.6 GB / 7.4 GB RAM  )
  10.0.4.5:4513     (  0% cpu;  2% machine; 0.076 Gbps;  3% disk IO; 2.6 GB / 7.4 GB RAM  )
  10.0.4.5:4514     (  0% cpu;  2% machine; 0.076 Gbps;  0% disk IO; 0.2 GB / 7.4 GB RAM  )
  10.0.4.5:4515     (  0% cpu;  2% machine; 0.076 Gbps;  0% disk IO; 0.2 GB / 7.4 GB RAM  )
  10.0.4.5:4516     (  0% cpu;  2% machine; 0.076 Gbps;  0% disk IO; 0.6 GB / 7.4 GB RAM  )

Coordination servers:
  10.0.4.1:4500  (reachable)
  10.0.4.2:4500  (reachable)
  10.0.4.3:4500  (reachable)
  10.0.4.4:4500  (reachable)
  10.0.4.5:4500  (reachable)

Client time: 03/19/18 08:59:37

Several details about individual FoundationDB processes are displayed in a list format in parenthesis after the IP address and port:

cpu

CPU utilization of the individual process

machine

CPU utilization of the machine the process is running on (over all cores)

Gbps

Total input + output network traffic, in Gbps

disk IO

Percentage busy time of the disk subsystem on which the data resides

REXMIT!

Displayed only if there have been more than 10 TCP segments retransmitted in last 5s

RAM

Total physical memory used by process / memory available per process

In certain cases, FoundationDB’s overall performance can be negatively impacted by an individual slow or degraded computer or subsystem. If you suspect this is the case, this detailed list is helpful to find the culprit.

If a process has had more than 10 TCP segments retransmitted in the last 5 seconds, the warning message REXMIT! is displayed between its disk and RAM values, leading to an output under Process performance details of the form:

10.0.4.1:4500       ( 3% cpu;  2% machine; 0.004 Gbps;  0% disk; REXMIT! 2.5 GB / 4.1 GB RAM  )

Machine-readable status

The status command can provide a complete summary of statistics about the cluster and the database with the json argument. Full documentation for status json output can be found here. From the output of status json, operators can find useful health metrics to determine whether or not their cluster is hitting performance limits.

Ratekeeper limit

cluster.qos.transactions_per_second_limit contains the number of read versions per second that the cluster can give out. A low ratekeeper limit indicates that the cluster performance is limited in some way. The reason for a low ratekeeper limit can be found at cluster.qos.performance_limited_by. cluster.qos.released_transactions_per_second describes the number of read versions given out per second, and can be used to tell how close the ratekeeper is to throttling.

Storage queue size

cluster.qos.worst_queue_bytes_storage_server contains the maximum size in bytes of a storage queue. Each storage server has mutations that have not yet been made durable, stored in its storage queue. If this value gets too large, it indicates a storage server is falling behind. A large storage queue will cause the ratekeeper to increase throttling. However, depending on the configuration, the ratekeeper can ignore the worst storage queue from one fault domain. Thus, ratekeeper uses cluster.qos.limiting_queue_bytes_storage_server to determine the throttling level.

Durable version lag

cluster.qos.worst_durability_lag_storage_server contains information about the worst storage server durability lag. The versions subfield contains the maximum number of versions in a storage queue. Ideally, this should be near 5 million. The seconds subfield contains the maximum number of seconds of non-durable data in a storage queue. Ideally, this should be near 5 seconds. If a storage server is overwhelmed, the durability lag could rise, causing performance issues.

Transaction log queue

cluster.qos.worst_queue_bytes_log_server contains the maximum size in bytes of the mutations stored on a transaction log that have not yet been popped by storage servers. A large transaction log queue size can potentially cause the ratekeeper to increase throttling.

Server-side latency band tracking

As part of the status document, status json provides some sampled latency metrics obtained by running probe transactions internally. While this can often be useful, it does not necessarily reflect the distribution of latencies for requests originated by clients.

FoundationDB additionally provides optional functionality to measure the latencies of all incoming get read version (GRV), read, and commit requests and report some basic details about those requests. The latencies are measured from the time the server receives the request to the point when it replies, and will therefore not include time spent in transit between the client and server or delays in the client process itself.

The latency band tracking works by configuring various latency thresholds and counting the number of requests that occur in each band (i.e. between two consecutive thresholds). For example, if you wanted to define a service-level objective (SLO) for your cluster where 99.9% of read requests were answered within N seconds, you could set a read latency threshold at N. You could then count the number of requests below and above the threshold and determine whether the required percentage of requests are answered sufficiently quickly.

Configuration of server-side latency bands is performed by setting the \xff\x02/latencyBandConfig key to a string encoding the following JSON document:

{
  "get_read_version" : {
    "bands" : [ 0.01, 0.1]
  },
  "read" : {
    "bands" : [ 0.01, 0.1],
    "max_key_selector_offset" : 1000,
    "max_read_bytes" : 1000000
  },
  "commit" : {
    "bands" : [ 0.01, 0.1],
    "max_commit_bytes" : 1000000
  }
}

Every field in this configuration is optional, and any missing fields will be left unset (i.e. no bands will be tracked or limits will not apply). The configuration takes the following arguments:

  • bands - a list of thresholds (in seconds) to be measured for the given request type (get_read_version, read, or commit)

  • max_key_selector_offset - an integer specifying the maximum key selector offset a read request can have and still be counted

  • max_read_bytes - an integer specifying the maximum size in bytes of a read response that will be counted

  • max_commit_bytes - an integer specifying the maximum size in bytes of a commit request that will be counted

Setting this configuration key to a value that changes the configuration will result in the cluster controller server process logging a LatencyBandConfigChanged event. This event will indicate whether a configuration is present or not using its Present field. Specifying an invalid configuration will result in the latency band feature being unconfigured, and the server process running the cluster controller will log a InvalidLatencyBandConfiguration trace event.

Note

GRV requests are counted only at default and immediate priority. Batch priority GRV requests are ignored for the purposes of latency band tracking.

When configured, the status json output will include additional fields to report the number of requests in each latency band located at cluster.processes.<ID>.roles[N].*_latency_bands:

"grv_latency_bands" : {
  0.01: 10,
  0.1: 0,
  inf: 1,
  filtered: 0
},
"read_latency_bands" : {
  0.01: 12,
  0.1: 1,
  inf: 0,
  filtered: 0
},
"commit_latency_bands" : {
  0.01: 5,
  0.1: 5,
  inf: 2,
  filtered: 1
}

The grv_latency_bands objects will only be logged for grv_proxy roles, commit_latency_bands objects will only be logged for commit_proxy roles, and read_latency_bands will only be logged for storage roles. Each threshold is represented as a key in the map, and its associated value will be the total number of requests in the lifetime of the process with a latency smaller than the threshold but larger than the next smaller threshold.

For example, 0.1: 1 in read_latency_bands indicates that there has been 1 read request with a latency in the range [0.01, 0.1). For the smallest specified threshold, the lower bound is 0 (e.g. [0, 0.01) in the example above). Requests that took longer than any defined latency band will be reported in the inf (infinity) band. Requests that were filtered by the configuration (e.g. using max_read_bytes) are reported in the filtered category.

Because each threshold reports latencies strictly in the range between the next lower threshold and itself, it may be necessary to sum up the counts for multiple bands to determine the total number of requests below a certain threshold.

Note

No history of request counts is recorded for processes that ran in the past. This includes the history prior to restart for a process that has been restarted, for which the counts get reset to 0. For this reason, it is recommended that you collect this information periodically if you need to be able to track requests from such processes.

fdbmonitor and fdbserver

The core FoundationDB server process is fdbserver. Each fdbserver process uses up to one full CPU core, so a production FoundationDB cluster will usually run N such processes on an N-core system.

To make configuring, starting, stopping, and restarting fdbserver processes easy, FoundationDB also comes with a singleton daemon process, fdbmonitor, which is started automatically on boot. fdbmonitor reads the foundationdb.conf file and starts the configured set of fdbserver processes. It is also responsible for starting backup-agent.

Note

Whenever the foundationdb.conf file changes, the fdbmonitor daemon automatically detects the changes and starts, stops, or restarts child processes as necessary. Note that changes to the configuration file contents must be made atomically. It is recommended to save the modified file to a temporary filename and then move/rename it into place, replacing the original. Some text editors do this automatically when saving.

During normal operation, fdbmonitor is transparent, and you interact with it only by modifying the configuration in foundationdb.conf and perhaps occasionally by starting and stopping it manually. If some problem prevents an fdbserver or backup-agent process from starting or causes it to stop unexpectedly, fdbmonitor will log errors to the system log.

If kill_on_configuration_change parameter is unset or set to true in foundationdb.conf then fdbmonitor will restart monitored processes on changes automatically. If this parameter is set to false it will not restart any monitored processes on changes.

Managing trace files

By default, trace files are output to:

  • /var/log/foundationdb/ on Linux

  • /usr/local/foundationdb/logs/ on macOS

Trace files are rolled every 10MB. These files are valuable to the FoundationDB development team for diagnostic purposes, and should be retained in case you need support from FoundationDB. Old trace files are automatically deleted so that there are no more than 100 MB worth of trace files per process. Both the log size and the maximum total size of the log files are configurable on a per process basis in the configuration file.

Disaster Recovery

In the present version of FoundationDB, disaster recovery (DR) is implemented via asynchronous replication of a source cluster to a destination cluster residing in another datacenter. The asynchronous replication updates the destination cluster using transactions consistent with those that have been committed in the source cluster. In this way, the replication process guarantees that the destination cluster is always in a consistent state that matches a present or earlier state of the source cluster.

Recovery takes place by reversing the asynchronous replication, so the data in the destination cluster is streamed back to a source cluster. For further information, see the overview of backups and the fdbdr tool that performs asynchronous replication.

Managing traffic

If clients of the database make use of the transaction tagging feature, then the number of transactions allowed to start for different tags can be controlled using the throttle command in fdbcli.

Other administrative concerns

Storage space requirements

FoundationDB’s storage space requirements depend on which storage engine is used.

Using the ssd storage engine, data is stored in B-trees that add some overhead.

  • For key-value pairs larger than about 100 bytes, overhead should usually be less than 2x per replica. In a triple-replicated configuration, the raw capacity required might be 5x the size of the data. However, SSDs often require over-provisioning (e.g. keeping the drive less than 75% full) for best performance, so 7x would be a reasonable number. For example, 100GB of raw key-values would require 700GB of raw capacity.

  • For very small key-value pairs, the overhead can be a large factor but not usually more than about 40 bytes per replica. Therefore, with triple replication and SSD over-provisioning, allowing 200 bytes of raw storage capacity for each very small key-value pair would be a reasonable guess. For example, 1 billion very small key-value pairs would require 200GB of raw storage.

Using the memory storage engine, both memory and disk space need to be considered.

  • There is a fixed overhead of 72 bytes of memory for each key-value pair. Furthermore, memory is allocated in chunks whose sizes are powers of 2, leading to a variable padding overhead for each key-value pair. Finally, there is some overhead within memory chunks. For example, a 32 byte chunk has 6 bytes of overhead and therefore can only contain 26 bytes. As a result, a 27-byte key-value pair will be stored in a 64 byte chunk. The absolute amount of overhead within a chunk increases for larger chunks.

  • Disk space usage is about 8x the original data size. The memory storage engine interleaves a snapshot on disk with a transaction log, with the resulting snapshot 2x the data size. A snapshot can’t be dropped from its log until the next snapshot is completely written, so 2 snapshots must be kept at 4x the data size. The two-file durable queue can’t overwrite data in one file until all the data in the other file has been dropped, resulting in 8x the data size. Finally, it should be noted that disk space is not reclaimed when key-value pairs are cleared.

For either storage engine, there is possible additional overhead when running backup or DR. In usual operation, the overhead is negligible but if backup is unable to write or a secondary cluster is unavailable, mutation logs will build up until copying can resume, occupying space in your cluster.

Running out of storage space

FoundationDB is aware of the free storage space on each node. It attempts to distribute data equally on all the nodes so that no node runs out of space before the others. The database attempts to gracefully stop writes as storage space decreases to 100 MB, refusing to start new transactions with priorities other than SYSTEM_IMMEDIATE. This lower bound on free space leaves space to allow you to use SYSTEM_IMMEDIATE transactions to remove data.

The measure of free space depends on the storage engine. For the memory storage engine, which is the default after installation, total space is limited to the lesser of the storage_memory configuration parameter (1 GB in the default configuration) or a fraction of the free disk space.

If the disk is rapidly filled by other programs, trace files, etc., FoundationDB may be forced to stop with significant amounts of queued writes. The only way to restore the availability of the database at this point is to manually free storage space by deleting files.

Virtual machines

Processes running in different VMs on a single machine will appear to FoundationDB as being hardware isolated. FoundationDB takes pains to assure that data replication is protected from hardware-correlated failures. If FoundationDB is run in multiple VMs on a single machine this protection will be subverted. An administrator can inform FoundationDB of this hardware sharing, however, by specifying a machine ID using the locality_machineid parameter in foundationdb.conf. All processes on VMs that share hardware should specify the same locality_machineid.

Datacenters

FoundationDB is datacenter aware and supports operation across datacenters. In a multiple-datacenter configuration, it is recommended that you set the redundancy mode to three_datacenter and that you set the locality_dcid parameter for all FoundationDB processes in foundationdb.conf.

If you specify the --datacenter-id option to any FoundationDB process in your cluster, you should specify it to all such processes. Processes which do not have a specified datacenter ID on the command line are considered part of a default “unset” datacenter. FoundationDB will incorrectly believe that these processes are failure-isolated from other datacenters, which can reduce performance and fault tolerance.

(Re)creating a database

Installing FoundationDB packages usually creates a new database on the cluster automatically. However, if a cluster does not have a database configured (because the package installation failed to create it, you deleted your data files, or you did not install from the packages, etc.), then you may need to create it manually using the configure new command in fdbcli with the desired redundancy mode and storage engine:

> configure new single memory

Warning

In a cluster that hasn’t been configured, running configure new will cause the processes in the cluster to delete all data files in their data directories. If a process is reusing an existing data directory, be sure to backup any files that you want to keep. Do not use configure new to fix a previously working cluster that reports itself missing unless you are certain any necessary data files are safe.

Uninstalling

To uninstall FoundationDB from a cluster of one or more machines:

  1. Uninstall the packages on each machine in the cluster.

    • On Ubuntu use:

      user@host$ sudo dpkg -P foundationdb-clients foundationdb-server
      
    • On RHEL/CentOS use:

      user@host$ sudo rpm -e foundationdb-clients foundationdb-server
      
    • On macOS use:

      host:~ user$ sudo /usr/local/foundationdb/uninstall-FoundationDB.sh
      
  2. Delete all the data and configuration files stored by FoundationDB.

    • On Linux these will be in /var/lib/foundationdb/, /var/log/foundationdb/, and /etc/foundationdb/ by default.

    • On macOS these will be in /usr/local/foundationdb/ and /usr/local/etc/foundationdb/ by default.

Upgrading

When a FoundationDB package is installed on a machine that already has a previous version, the package will upgrade FoundationDB to the newer version. For recent versions, the upgrade will preserve all previous data and configuration settings. (See the notes on specific versions for exceptions.)

To upgrade a FoundationDB cluster, you must install the updated version of FoundationDB on each machine in the cluster. As the installations are taking place, the cluster will become unavailable until a sufficient number of machines have been upgraded. By following the steps below, you can perform a production upgrade with minimal downtime (seconds to minutes) and maintain all database guarantees. The instructions below assume that Linux packages are being used.

Warning

The macOS version of the FoundationDB server is intended for single-machine development use only; its use in multi-machine clusters is not supported. In the present release, the Linux version is the best-tested and most performant platform for multi-machine clusters.

Note

For information about upgrading client application code to newer API versions, see the API Version Upgrade Guide.

Install updated client binaries

Apart from patch version upgrades, you should install the new client binary on all your clients and restart them to ensure they can reconnect after the upgrade. See Multi-version client for more information. Running status json will show you which versions clients are connecting with so you can verify before upgrading that clients are correctly configured.

Stage the packages

Go to Downloads and select Ubuntu or RHEL/CentOS, as appropriate for your system. Download both the client and server packages and copy them to each machine in your cluster.

Perform the upgrade

For Ubuntu, perform the upgrade using the dpkg command:

user@host$ sudo dpkg -i foundationdb-clients_7.1.59-1_amd64.deb \
foundationdb-server_7.1.59-1_amd64.deb

For RHEL/CentOS, perform the upgrade using the rpm command:

user@host$ sudo rpm -Uvh foundationdb-clients-7.1.59-1.el7.x86_64.rpm \
foundationdb-server-7.1.59-1.el7.x86_64.rpm

The foundationdb-clients package also installs the C API. If your clients use Ruby, Python, Java, or Go, follow the instructions in the corresponding language documentation to install the APIs.

Test the database

Test the database to verify that it is operating normally by running fdbcli and reviewing the cluster status.

Remove old client library versions

You can now remove old client library versions from your clients. This is only to stop creating unnecessary connections.

Version-specific notes on upgrading

Upgrading to 7.1.x

Upgrades to 7.1.0 or later will break any client using fdb_transaction_get_range_and_flat_map, as it is removed in version 7.1.0.

Upgrading from 6.2.x

Upgrades from 6.2.x will keep all your old data and configuration settings.

Upgrading from 6.1.x

Upgrades from 6.1.x will keep all your old data and configuration settings. Data distribution will slowly reorganize how data is spread across storage servers.

Upgrading from 6.0.x

Upgrades from 6.0.x will keep all your old data and configuration settings.

Upgrading from 5.2.x

Upgrades from 5.2.x will keep all your old data and configuration settings. Some affinities that certain roles have for running on processes that haven’t set a process class have changed, which may result in these processes running in different locations after upgrading. To avoid this, set process classes as needed. The following changes were made:

  • The proxies and master no longer prefer resolution or transaction class processes to processes with unset class.

  • The resolver no longer prefers transaction class processes to processes with unset class.

  • The cluster controller no longer prefers master, resolution or proxy class processes to processes with unset class.

See Guidelines for setting process class for recommendations on setting process classes. All of the above roles will prefer stateless class processes to ones that don’t set a class.

Upgrading from 5.0.x - 5.1.x

Upgrades from versions between 5.0.x and 5.1.x will keep all your old data and configuration settings. Backups that are running will automatically be aborted and must be restarted.

Upgrading from Older Versions

Upgrades from versions older than 5.0.0 are no longer supported.

Version-specific notes on downgrading

In general, downgrades between non-patch releases (i.e. 6.2.x - 6.1.x) are not supported.

Downgrading from 6.3.13 - 6.2.33

After upgrading from 6.2 to 6.3, the option of rolling back and downgrading to 6.2 is still possible, given that the following conditions are met:

  • The 6.3 cluster cannot have TLogVersion greater than V4 (6.2).

  • The 6.3 cluster cannot use storage engine types that are not ssd-1, ssd-2, or memory.

  • The 6.3 cluster must not have any key servers serialized with tag encoding. This condition can only be guaranteed if the TAG_ENCODE_KEY_SERVERS knob has never been changed to true on this cluster.